Winter-ready your home: A simple energy checkup before the cold sets in
November 17, 2026
Winter in Ottawa can put your home — and your heating system — to the test. As temperatures drop, it’s normal for energy use to increase as we work to keep our homes warm and comfortable.
But before turning up the thermostat, take a few minutes to check how well your home is holding onto heat.
From drafty doors to a hard-working furnace, small issues can add up. A quick winter energy checkup can help you spot opportunities to improve comfort, reduce wasted energy and prepare your home for the months ahead.
Start with the places where heat escapes
Your home’s building envelope — including the roof, walls, windows, doors and foundation — separates your living space from the outdoors. When insulation is inadequate or there are gaps and cracks, heat can escape more easily.
You don’t need to inspect your entire home at once. Start with these common trouble spots.
Check your windows and doors
On a cold day, walk around your home and check for noticeable drafts around windows and exterior doors.
Look for:
- Gaps around window or door frames
- Worn or damaged weatherstripping
- Cracks or gaps around trim
- Cold air coming through the bottom of exterior doors
Weatherstripping and caulking can help address smaller air leaks. Thermal curtains can also provide an extra layer around windows.
If you notice significant drafts or condensation between window panes, it may be worth having your windows assessed to determine whether replacement or another improvement makes sense.
Look up — and down
Heat loss doesn’t just happen around windows and doors.
Your attic, exterior walls, outlets/light switches and basement or foundation can also have a significant impact on your home’s energy performance.
If your home is older or you suspect significant air leaks, replacing weatherstripping may not be enough, but starting with these key areas will help you spot where heat is escaping.
Give your heating system a checkup
Your heating system is working hard during the winter, so make sure it has what it needs to operate properly.
Start with the basics:
Replace or clean your furnace filter: Follow the manufacturer’s recommendations for your particular filter and system. A dirty filter can restrict airflow and make your system work harder.
Keep vents and registers clear: Make sure furniture, rugs and other objects aren’t blocking them.
Check that warm air is circulating: If some rooms are consistently much colder than others, check that your vents and air duct dampers are open. Persistent cold spots can indicate problems with your home's insulation or air sealing.
And don’t forget about regular maintenance. If you have a furnace, boiler, heat pump or other heating equipment, follow the manufacturer’s maintenance recommendations and have the system professionally serviced when appropriate.
Take a closer look at your thermostat
Your thermostat controls when your heating system runs, so small changes to your heating schedule can affect energy use.
If you have a programmable or smart thermostat, check that your schedule still reflects your household’s routine.
For example, you may be able to automatically lower the temperature when everyone is asleep or away and return it to a comfortable setting before you need it.
If you’re using a heat pump, be sure to follow the manufacturer’s or installer’s recommendations for thermostat settings. Heat pumps operate differently from conventional heating systems, and frequent or significant temperature adjustments may not be appropriate for every system.
Don’t overlook your hot water
Heating your home isn’t the only way you use energy in the winter.
Hot water can also account for a significant portion of household energy use. Check your hot water system for leaks and make sure your water heater is operating according to the manufacturer’s recommendations.
Aside from insulating your hot water pipes, you can also reduce hot water use by:
- Taking shorter showers
- Washing clothes in cold water when appropriate
- Running the dishwasher and washing machine with full loads
- Fixing dripping hot water faucets promptly
If you’re replacing a water heater, explore whether a more efficient model could make sense for your home.
Look at your lighting and electronics
With shorter days and longer nights, you’ll probably be using your lights more often.
LED bulbs use less electricity than traditional incandescent bulbs and last longer, making them a simple upgrade if you haven’t already made the switch.
Smart plugs and power bars can make this easier for devices that tend to stay on or draw small amounts of electricity while in standby mode.
Understand your home’s energy use
Understanding your energy consumption data can provide valuable insights into your home’s usage patterns, especially when navigating time-of-use or tiered rate plans. To see which pricing model works best for your household, you can use the OEB bill calculator or our Rate Plan Comparison tool.
Take a look at your consumption over the past year and compare it from month to month. Winter increases can be expected, but significant changes in your home’s energy use may help you identify opportunities to investigate.
If you’re considering a larger upgrade — such as a heat pump, insulation, solar panels or battery storage — understanding your current energy use can also help you make a more informed decision.
Know when to go beyond a DIY check
A quick walkthrough is a great starting point, but a professional home energy assessment provides a full evaluation of your home’s insulation, air sealing, and heating performance.
Thinking about an energy upgrade?
If your checkup reveals that your home could benefit from upgrades like improved insulation, air sealing, heat pumps, or solar panels, look into available incentives before starting work.
The Home Renovation Savings program offers incentives for a range of eligible home energy upgrades, including insulation, air sealing and heat pumps. Program requirements and incentive amounts can change, so check the current eligibility requirements before purchasing equipment or beginning work.
And remember: some projects require an energy assessment or other steps to be completed before work begins.
A warmer, more efficient home starts with knowing where to look
You don’t need to tackle everything at once.
Start with a walk around your home. Look for drafts, check your heating system, review your thermostat settings and think about areas where your home could be more comfortable.
Then, if you identify bigger opportunities, consider getting professional advice before investing in an upgrade.
The goal isn’t just to use less energy — it’s to make the energy you use work harder for your home.